Explore the mobile lighting beacon (lighting truck), a must-have tool for emergency rescue

First, we need to understand the role of mobile lighting towers (lighting trucks)

Mobile lighting towers (lighting trucks) are mainly used in outdoor operations, emergency and disaster relief, road maintenance, emergency lighting, etc. It is suitable for the lighting needs of the coal industry, PetroChina, Sinopec, CNOOC, electric power, metallurgy, railways, steel, ships, aerospace, public security firefighting, chemical industry, government departments and large enterprises.

Basic types and product characteristics of mobile lighting towers (lighting trucks)

Mobile lighting towers (lighting trucks) are generally equipped with 4 headlights, which can illuminate in four directions. 4 silent and wear-resistant casters are installed on the bottom. The 4 wheels have two fixed wheels and two moving wheels, and are equipped with brakes. It can be moved like a car; a generator is installed on the floor (the generator can be a gasoline generator or a diesel generator, and the generator brand can choose to use high, medium or low-grade ones on the market) as a power supply for lighting equipment, or it can be connected to commercial power. , on this basis, automatic lifting rods and control systems are installed, so it is called an all-round mobile lighting vehicle, also known as all-round mobile lighting work, liftable lighting work lights and power generation lighting equipment, etc.

Lifting methods are divided into three categories: pneumatic lifting, hydraulic lifting, and manual lifting.

The lighting angles are divided into: remote control of the up and down, left and right 270-degree rotation of the platform, and manual control of the up and down, left and right illumination angles of the lamps.

Movement method: Mainly installing a base plate under the generator and fixing four wheels to facilitate portability and movement.

Mobile lighting trucks can be divided into portable lifting mobile lighting trucks, all-round large-scale mobile lighting trucks, all-round remote control automatic lifting work lights and all-round trailer lighting beacons.

How to use mobile lighting tower (lighting truck):

After the customer receives the mobile lighting equipment, the manufacturer will send it to the user to see whether it is packaged individually or in a whole wooden box. If it is packaged individually, the customer needs to assemble each individual unit by himself. If it is packaged in a whole wooden box (whole wooden box The packaging cost is high and the freight cost is also increased) you can just remove the wooden box directly, first prepare the generator for use

1. Gasoline or diesel (select according to the purchased generator).

2. Engine oil (four-stroke engine oil is acceptable). When adding gas (diesel) and engine oil, be careful not to add too much or too little, especially if the engine oil is filled too full or too little, it may cause trouble starting the engine. To add engine oil, unscrew the oil cap. There is a marked scale, just add it to a little below the position marked F (pull out the oil scale several times to check), then stand the lifting rod up, and lock the lifting rod with the attached locking device to prevent the lifting rod from returning. Pour, install the lamp panel, and connect the corresponding connecting wires. Place the generator lighting equipment in a balanced position and press the brake device of the universal wheel to secure it (to prevent the lighting equipment from sliding away). Then start the generator (make sure the generator output power switch is turned off before starting the generator). When using the generator to generate electricity in the summer, you do not need to open the damper. You can directly pull the rope to generate electricity (generators equipped with batteries can be started directly) No need to pull the rope). In winter, you need to open the damper, then start the generator, and wait until the generator starts to balance (when the generator voltmeter shows 220V or 380) to close the damper. If the damper is not closed, the generator will shake.When the generator is hot-started (it has just been used and the generator is still in a hot state not long ago), it can be started directly without opening the air damper. After the voltage is balanced, turn on the generator output power switch, and then operate the control system to control the lifting and lowering of the automatic lifting rod and the switching of the lamps. It can also be controlled manually or remotely.

Finally, share the precautions for using mobile lighting towers (lighting trucks)

1. In areas with thin air. Do not turn on the lighting equipment at full load. For example, if a 2KW generator drives a 2000W lamp, some lights will not light up. You can choose to only turn on some lights or choose a generator with a power greater than the lighting lamp. For example, use a 3KW generator to drive a 2000W lamp. .

2. Mobile lighting vehicle maintenance needs If the mobile lighting equipment is not used for a long time, all the oil needs to be drained. If not drained, it will easily cause the generator to become unusable or damaged for the second time.